Finishing an assignment is only part of the process. You also need to send the right version to the correct destination, verify that it was submitted, and return later to review your instructor's feedback.
This guide explains how to submit assignments in Brightspace and follow through with grades, rubrics, and comments. Use it as a practical workflow while following the requirements displayed in your own course.
Start with three checks: the correct assignment, the correct submission method, and a visible record of completion. After grading, add a fourth: one specific improvement you will make next time.
For help with the wider platform, visit our Brightspace student guide. Here, the focus is on the complete assignment-to-feedback cycle.
Review the Assignment Before Uploading
D2L distinguishes the due date, the submission deadline, from the end date, which controls the final submission window, and allows instructors to specify allowed file extensions and other assignment requirements (D2L's assignment requirements and dates). Do not treat an assignment that remains accessible as automatic permission to submit late without a penalty.
Before preparing the final version, check:
· Identity: Correct course, assignment title, and section.
· Instructions: Required questions, sections, sources, and formatting.
· Timing: Due date, time zone, and any availability restrictions.
· Format: Accepted file extensions or text-entry requirements.
· Rubric: Available grading criteria and point allocations.
· Attachments: Required supporting files or worksheets.
· Integrity rules: Permitted collaboration, resources, and assistance.
Use the rubric as a final review checklist when one is provided. Ask about unclear expectations early rather than guessing immediately before submission.
Keep your completed work in a permanent location you can find again. Open the intended file and inspect it before beginning the upload.
How to Submit Assignments in Brightspace
D2L documents submissions through Assignments or a linked activity in Content, with file, text, and other options depending on the assignment; the file workflow uses Add a File, Add, and then Submit (official submission instructions). Choose the route and response type actually available in your course.
Open the Assignment
Begin with one of these routes:
1. Open the correct course.
2. Select Assignments, directly or through the course's activity menu.
3. Choose the assignment title.
Alternatively, open Content, find the relevant module, and select its assignment link. Confirm the activity name before attaching anything.
If the activity directs you to a publisher or another external platform, follow that approved workflow. Do not assume the standard Brightspace upload steps apply to every linked assessment.
Upload a File
For a standard file submission:
1. Read the instructions and allowed extensions.
2. Select Add a File.
3. Choose the intended file using an available source.
4. Wait until the upload finishes.
5. Select Add when required.
6. Review the attached filename.
7. Enter any relevant comments.
8. Select Submit and complete the displayed confirmation process.
Choose the source options your institution provides. Do not assume a direct Google Drive or OneDrive connection is available simply because another college’s tutorial shows one.
Suppose you need to upload a local copy of a cloud document, export or download it in an accepted format, and inspect the result first. Renaming a file extension is not a substitute for properly converting the document.
Submit a Text Response
If the assignment permits text entry, place your response in the designated Text Submission area. Review the formatting, citations, links, and any embedded material before the final submission.
Keep a permitted backup of longer writing before entering it online. Do not place the whole assignment in a Comments field unless the instructor explicitly directs you to do so.
For a text-only or file-or-text task, use the response method allowed by the instructions. Do not submit a link in place of a required document without permission.
Submit Through Content
If you opened the assignment within a module, use the visible My Work or equivalent submission area. Add the required work, review it, and finish with Submit.
Do not stop merely because the file appears in the module. Check the resulting submission information before moving on.
Confirm That Your Work is Submitted
Madison College's student guidance emphasizes selecting Submit and waiting for the confirmation success message before navigating away or closing the browser (assignment confirmation guidance). Treat this final check as part of the assignment, not an optional extra.
After submitting, inspect the available record:
· Destination: The intended course and assignment.
· Content: Correct filename or text response.
· Time: Submission time or timestamp, if displayed.
· Status: Completion or submission information.
· Evidence: Confirmation message, history, or receipt if provided.
If you receive a confirmation email, retain it with your own coursework records. However, do not assume every institution or assignment provides the same email, alert, or receipt ID.
Use the available submission history or activity record to investigate uncertainty. A missing email alone is not a reason to upload repeatedly without checking what has already been submitted.
If the page appears unsuccessful and the deadline is approaching, record the error and contact the instructor and technical support through approved channels. Include the assignment name and the time of the attempt.
Handle Wrong Files, Resubmissions, and Upload Errors
D2L states that students cannot delete a successfully submitted assignment file, that another submission depends on permissions, and that upload failures can involve file types, filenames, connectivity, or size limits set by the organization (resubmission and upload troubleshooting). Check the specific problem before repeatedly uploading.
If You Submitted the Wrong File
Open the assignment and inspect the existing submission. Check whether another submission is permitted.
If it is, upload the correct work and notify your instructor which version should be reviewed. If it is not, request permission rather than assuming you can replace or remove the earlier file.
Do not assume a correction erases the original timestamp or changes the late-work policy. Ask how the replacement will be treated.
If the File Will Not Upload
Try these checks outside an active timed assessment:
1. Confirm the allowed extension.
2. Open the file locally to check it.
3. Select the actual document, not a temporary or shortcut file.
4. Use a short, clear filename consistent with course instructions.
5. Check the applicable size limit.
6. Allow enough time for the upload to finish.
7. Follow institution-approved browser and connection checks.
For a large media submission, use the approved compression or media-sharing approach. Do not split a required single file, remove essential Content, or submit an external link without permission.
If the assignment is unavailable, ask about opening dates, closing dates, prerequisites, or access restrictions. A browser reset is not the answer to every access problem.
For accumulated overdue work, use our online-class catch-up plan. Separate technical questions from decisions about which work can still earn credit.
Check Feedback Through Assignments
D2L's feedback guide describes opening Unread in the Evaluation Status column, reviewing the View Feedback page, and using View Inline Feedback or Download when annotations are provided (assignment feedback and rubrics). Match those labels to the options available for your assignment.
Use this route:
1. Enter the correct course.
2. Open Assignments.
3. Locate the evaluated activity.
4. Select Unread or the available feedback link.
5. Review the grade and overall comments.
6. Open the graded rubric if provided.
7. Select View Inline Feedback for file annotations.
8. Use Download if you want the available annotated PDF.
Read both the overall message and the comments attached to specific parts of your work. Do not stop at the numeric score.
For a rubric, compare the achieved level with the next level's description. Identify the evidence or skill that would improve the result.
If an expected rubric or annotation is not visible, ask whether it has been released and where you should access it. Avoid assuming the absence of a visible comment means the instructor supplied no feedback.
Check Grades Through the Grades Tool
Brightspace's Grades tool can show activity scores, points, weights, and Comments and Assessments, but instructors control which items and columns students can see (D2L's guide to viewing grades). Use the visible information alongside the syllabus's grading policy.
To review a result:
1. Open the course.
2. Select Grades from the available navigation.
3. Find the correct grade item.
4. Review its score and any displayed weighting.
5. Open the available comments, rubric, or feedback link.
6. Return to the original activity for additional detail if needed.
Do not rely on finding a particular speech-bubble icon. Read the available labels and expand the relevant feedback area.
Understand the Score in Context
Check whether you are looking at one assignment, a category, or an overall result. Ask how ungraded work, missing work, exemptions, and remaining assessments affect the calculation.
For a simple example, 18 points out of 20 equals 90% on that item. Do not assume it contributes 90 percentage points to the course grade; its contribution depends on the course's grading system.
If a score is blank or unexpected, first verify the activity and submission record. Then ask about release timing, evaluation status, or the applicable grading rule.
Do not treat the number currently visible as a guarantee of your final grade. Keep track of what remains and seek clarification before making academic decisions.
Use Class Progress as an Additional Route
D2L describes Class Progress as another place to review course activities, grades, rubrics, and feedback, with visible categories depending on organizational settings (Class Progress documentation). Use it when your course makes the tool available.
Try this route:
1. Open the relevant course.
2. Find Class Progress, Progress, or the location identified in your orientation.
3. Select or expand Assignments or Grades.
4. Locate the relevant activity.
5. Open the available Feedback link or assessment detail.
If your screen does not match, return to Assignments or Grades instead of looking for instructor-only administrative controls. Ask the instructor where feedback is intended to be viewed in this course.
Use progress information as a prompt to review your work. Confirm assessment results in the relevant grade or feedback record rather than equating a completion indicator with a high score.
Turn Instructor Feedback Into a Better Next Assignment
Create a short feedback log after reviewing a result. Focus on one or two changes you can apply, not a complete rewrite of your study routine.
For example:
| Feedback you received | Next action to try |
| The argument needs stronger evidence. | Match each main claim with a relevant example. |
| The calculation method is unclear. | Write intermediate steps and label units. |
| Structure is difficult to follow. | Outline sections before drafting. |
| Citation details are incomplete. | Check each reference against the required style. |
Before starting the next assignment, review the log and the new prompt together. Apply relevant lessons without assuming every task uses identical requirements.
If you need help understanding the material, consider permitted tutoring or instructor office hours. Our guide to choosing an online tutor for college courses can help you evaluate your learning support options.
Frequently Asked Questions
How Can I Tell Whether I Finished the Submission?
Complete the final Submit action, wait for the displayed confirmation, and inspect the available submission record. Check the assignment and file rather than relying only on email.
What Should I Do If I Uploaded the Wrong Version?
Check whether another submission is allowed and notify the instructor promptly. Ask which version will be assessed and how any deadline rules apply.
Why Can I See a Score but Not Detailed Comments?
Check the original assignment, available rubric, and feedback links. If you expected additional comments, ask your instructor whether they are available and where to find them.
What If My Grade Does Not Match My Understanding of the Rubric?
Identify the specific criterion and explain your question respectfully. Refer to your submitted work and ask how the criterion was applied rather than requesting a higher score without an explanation.
To submit assignments in Brightspace confidently, review the requirements, send the intended work, and verify the result. Then return to Assignments, Grades, or the available progress tools to understand the evaluation.
Make feedback review part of the workflow rather than the end of the conversation. If you need more guidance, explore our complete guide to online class help and choose support that helps you learn and complete your own coursework.